Bat box summer quarter ETICS - narrow

This bat universal quarter is suitable for all so-called house bats. The smallest bat species like Pipistrelle, Pipistrelle, and Bearded Bat find their summer quarters or intermediate quarters in this ETIC installation box for bats. The box is self-cleaning and maintenance-free because the excrement can fall down the special dung chute.This bat ETIC installation box can be integrated directly into the thermal insulation of the building facade. This universal quarter for bats is made of ETIC insulation panels. The nesting aid is extremely lightweight and is easily integrated into the external insulation of buildings.The nest box for bats is installed as a block in the thermal insulation composite system and is plastered evenly within the reinforcement and only one gap remains visible for entry. This gap ensures a safe approach for bats even on smooth facade surfaces.Attachment and assembly:Suitable for integrated mounting in external facades of buildings with ETICS. The nest box mount height is above 5 m, and the direction is facing away from the weather, preferably exposed in the area of the attic and eaves.When mounting, make sure that there are enough approach and departure possibilities below the air hole so that the nesting box can be successfully accepted and approached.We recommend a distribution of several boxes on one building, so that bats have several alternative quarters according to the weather conditions. This box can compensate for the loss of summer quarters and intermediate quarters of bats, e.g. under roof tiles, in roof boarding, wall gaps, etc. The box is integrated directly into the external insulation. It is made of ETICS material.Occupants: Broad-winged bat, pygmy bat, etc.Material: Thermal insulation boardsDimensions: width 40 cm x height 40 cm x depth 10 cmEntrance hole: 36 cm x 5 cmWeight: 200g

Common swift nest box - NEW on the market. An alternative to Schwegler. Developed by ornithologists.This nesting box is suitable for swifts, sparrows and bats.The nest box a nest hollow as a nest for swifts integrated so that the eggs do not bounce or roll.The brood chamber is optimally adapted for maximum breeding success for swifts.The young animals have enough space to train the flight muscles.The brood chamber is designed so that overheating of the box with loss of brood is greatly minimized by the height and two separate ventilation holes.The ventilation holes are installed so that there is no drafts. An edge above the entry hole increases the likelihood of the nesting aids being settled, since common swifts like to fly to exposed edges and eaves in the parapet area in search of roosting quarters.A columned area for bats is integrated on the back wall of the boxes .The niche can be used by bats as a roost or nursery. The common swift nest box can also be used as a compensatory measure for sparrows (especially house sparrows ). Suitable for buildings , in an attractive design.Developed with years of experience.Made in Germany.A special recommendation for compensation measures and CEF measures for building breeders.The ideal nesting aid for swifts and house sparrows.This new swift nesting box model combines many advantages: Easy installation in the ETICS system. Easy installation on the facade. Maintenance option by removing the front panel. The perfect nesting box for compensatory measures, as it is suitable for both breeding birds and bats. Thanks to the new design, cold bridges are avoided more effectively. Easy installation on the facade. Maintenance option by removing the front panel. Thanks to the new design, cold bridges are avoided more effectively. The nesting box can be painted with facade paint. Self-explanatory without building instructionsOrder the swift box now.Short delivery time.You can now buy and pre-order the all-in-one nesting box for swifts, sparrows and bats online.Minimum purchase: 6 pieces.Material: concreteScope of delivery: including dowels and screwsDimensions: External dimensions: W 35 x H 20 x D 24 cm.Brood chamber: W 30 x H 18 x D 18 cm. Suspension by screwing from the inside.Entrance hole:  W 60 x H 30 mm.By attaching you make a contribution to the protection of swifts. With this box you create nesting places.+++ We donate 1% of the proceeds annually to projects in environmental education to protect nature +++

This bat universal quarter is suitable for all so-called house bats. The smallest bat species like Pipistrelle, Pipistrelle, and Bearded Bat find their summer quarters or intermediate quarters in this ETIC installation box for bats. The box is self-cleaning and maintenance-free because the excrement can fall down the special dung chute.This Fledermaus ETIC installation box can be integrated directly into the thermal insulation of the building facade. This universal quarter for bats is made of ETIC insulation panels. The nesting aid is extremely lightweight and is easily integrated into the external insulation of buildings.The Fledermaus nesting box is installed as a block in the thermal insulation composite system and is plastered evenly within the reinforcement and only one gap remains visible for entry. This gap ensures a safe approach for bats even on smooth facade surfaces.Attachment and assembly:Suitable for integrated mounting in external facades of buildings with ETICS. The nest box mount height is above 5 m, and the direction is facing away from the weather, preferably exposed in the area of the attic and eaves.When mounting, make sure that there are enough approach and departure possibilities below the air hole so that the nesting box can be successfully accepted and approached.We recommend a distribution of several boxes on one building, so that bats have several alternative quarters according to the weather conditions. This box can compensate for the loss of summer quarters and intermediate quarters of bats, e.g. under roof tiles, in roof boarding, wall gaps, etc. The box is integrated directly into the external insulation. It is made of ETICS material.Occupants: broad-winged bat, pygmy bat, etc.Material: Thermal insulation boardsDimensions: width 40 cm x height 40 cm x depth 10 cmEntrance hole: 36 cm x 5 cmWeight: 200g

This swifts ETIC-System installation box can be integrated directly into the thermal insulation of the building facade. This nest box for swifts consists of ETICS insulation panels. The nesting aid is lightweight and can be easily integrated into the external insulation of buildings. The swift nesting box is installed as a block in the thermal insulation composite system and is plastered even with the reinforcement. Only one hole remains visible for entry. The entry hole ensures a safe approach for building breeders, such as swifts and sparrows, even on smooth facade surfaces.Attachment and assembly:Suitable for integrated mounting in external facades of buildings with ETICS. The nest box height is above 5 m, and the direction is facing away from the weather, preferably exposed in the area of the attic and eaves.When mounting, make sure that there are enough approach and departure possibilities below the air hole so that the nesting box can be successfully accepted and approached.We recommend a grouping of several boxes since swifts are colony breeders.     Cleaning & Control:An opening for cleaning is deliberately not integrated. When the box is occupied by swifts, cleaning not necessary.  Occupants: swifts and sparrowsMaterial: WDV thermal insulation boardsDimensions: width 37 cm x height 19 cm x depth 15 cmEntrance hole: 7 cm x 3,5 cmWeight: 200gScope of delivery: 1 x WDV installation boxHere you can find other swift nest box models.

This swift ETIC installation box with two entrance holes is integrated directly into the thermal insulation of the facade. This double nesting box for swifts consists of ETICS insulation boards and has two separate breeding chambers. The artificial nesting aid is particularly light due to the choice of material and can be easily integrated into the external insulation of buildings. The 2-fold swift nesting box is installed in the thermal insulation composite system and is evenly plastered within the reinforcement. Only the rings remain visible for entry. The rings ensure a safe approach for building breeders, such as swifts and sparrows, even on smooth facade surfaces.Attachment and assembly:Suitable for integrated mounting in external facades of buildings with ETICS. The nest box height is above 5 m, and the direction is facing away from the weather, preferably exposed in the area of the attic and eaves.When mounting, make sure that there are enough approach and departure possibilities below the air hole so that the nesting box can be successfully accepted and approached.We recommend a grouping of several boxes since swifts are colony breeders.   Cleaning & Control:An opening for cleaning is deliberately not integrated. When the box is occupied by swifts, cleaning not necessary.  Occupants: swifts and sparrowsMaterial: thermal insulation boardsDimensions: width 37 cm x height 19 cm x depth 15 cmEntrance hole: 7 cm x 3,5 cmWeight: 500g

This swift ETIC installation box with three entrance holes is integrated directly into the thermal insulation of the facade. This double nesting box for swifts consists of ETICS insulation boards and has three separate breeding chambers. The artificial nesting aid is lightweight due to the choice of material and can be easily integrated into the external insulation of buildings. The 3-fold swift nesting box is installed in the thermal insulation composite system and is evenly plastered within the reinforcement. Only the rings remain visible for entry. The rings ensure a safe approach for building breeders, such as swifts and sparrows, even on smooth facade surfaces.Attachment and assembly:Suitable for integrated mounting in external facades of buildings with ETICS. The nest box mount height is above 5 m, and the direction is facing away from the weather, preferably exposed in the area of the attic and eaves.When mounting, make sure that there are enough approach and departure possibilities below the air hole so that the nesting box can be successfully accepted and approached.We recommend a grouping of several boxes since swifts are colony breeders.   Cleaning & Control:An opening for cleaning is deliberately not integrated. When the box is occupied by swifts, cleaning not necessary.  Occupants: swifts and sparrowsDimensions: width 113 cm x height 19 cm x depth 15 cmEntrance hole: 7 cm x 3,5 cmWeight: 500g

Swifts in a targeted location with optical support. The pointing bird, a black swift silhouette, is placed near the swift boxes in such a way that it shows the searching swimmers the direction of approach. This process has been tried and tested several times.Set additional visual incentives for compensatory measures to achieve rapid settlement success.Our pointing bird is made from coated, weatherproof sheet material. 6.5 mm birch multiplex dark brown / black coated. Oiled edges.Product dimensions: (L x W x H): 390 x 250 x 6.5 mm Scope ofdelivery: pointing bird, 2 x TX20 facade screw - with 12mm flat head, stainless steel, corrosion-resistant, 2x Würth dowels 6 x 36 without collar, 2 x spacers.A pointing bird is the perfect complement to our sound dummies for 230V AC power or 12V solar operation .